Until recently the only solution for extensive sewer or underground concealed line problems was to replace the entire pipe. This used to be an incredibly time consuming, invasive, expensive, and disruptive task. The introduction of new pipe relining methods has changed the process entirely. We at Shire Care Plumbing now implement this method to repair cracked pipes after getting rid of root blockage issues. Every plumber St George on our team is well- versed with the process.

 

About Pipe Relining

 

This method is relatively straightforward:

 

• First, two trenches are dug on either side of your pipe.
• The Plumber St George will then inspect the pipe to clear out any invasive tree root blockages.
• A CCTV drain camera is used for inspection, to determine the extent of the damage. This will help determine whether pipe relining will fix this issue.
• Once the source of the problem is located, a lasting epoxy relining material is inserted into your existing pipe.
• Once inflated, it fits into the cavity tightly.
• CCTV drain camera is used to check the final fit.
• The trenches are filled back as they were.

 

Advantages of Pipe Relining

 

1. Saves Time

 

The original pipe remains precisely where it is as significantly smaller trenches have to be dug. This saves a considerable amount of time, and the downtime on the property is lower as well.

 

2. Less Intrusive

 

The great thing about pipe relining is that your landscape and planting features remain unaffected as the entire pipeline doesn’t have to be dug. It is much less intrusive, resulting in it being less disruptive as well.

 

3. Cost-Efficient

 

The cost of the pipe relining process is relatively cheaper as well. This is mainly because it isn’t as labour-intensive and time-consuming as the traditional method. You save additional money as the landscape of your property remains undamaged. This brings down the total cost of the project.

4. Easier To Clean

 

In the conventional pipe replacement method, a massive portion of the landscape has to be dug. This process requires only two small trenches on either side of the pipe. This makes cleaning up after considerably easier, and your landscape remains unaffected as well.

 

5. Resilient and Long-Lasting

 

This specialised relining method that’s used to fix cracked pipes is a lot tougher than regular PVC pipes. It offers greater protection against tree roots than a basic new pipe installation. Though this process is new to Australia, it has seen much success in parts of Europe and the US. The epoxy lining can last for up to 50  years and comes with excellent warranties.

 

6. Multiple Applications

 

Besides pipe relining, this method can be used to fix sewer and stormwater, concrete pipes, fire services pipelines, copper pipes, property connection seal offs,  HVAC system and water mains, as well as pool pipes.

 

With over 20 years of experience behind us, we at Shire Care Plumbing have the expertise to handle all your pipe relining and other plumbing requirements. For more information about our local plumber St George services, feel free to call us at this number- 1800 744 732. You can also request a free quote via this online form.

 

Did you suddenly get a ballooned water bill? Check whether your water consumption had increased during the billing period. If there was no change in use, a water leak could be the probable cause. It is wise to call an emergency plumber St George without delay. We at Shire Care Plumbing  Offer excellent regular and emergency plumbing services as well as leak detection services.

 

In a way, water leaks are not so difficult to identify because you will notice some flooding in the kitchen sink or bathroom area or light stains on your wall or water pooling in the landscape. But early stage or very deep water leaks cannot be easily spotted because the damage is still insignificant and invisible.

 

Causes of Water Leak

 

Most plumbing systems are designed to be sturdy and withstand any damage. Once installed, the existence of the plumbing system on your property becomes something you rarely think of. Plumbing installations catch your attention only when you face a plumbing problem. Water leaks happen due to many reasons, but some common causes include:

 

• Every plumbing system has a life span, gets old, and is likely to spring some leakage problems on and off. If you do not want to face an unexpected difficulty and call in an emergency plumber St George and can afford to replace a very old existing plumbing system, go ahead and do it.

 

• Rusted, corroded, and cracked pipes can spring unmanageable water leaks.

 

• Plumbing joints and pipes sometimes break or crack due to pressure from shifting soil arising from incorrect grading.

 

• It is common to see pipes damaged and cracked during repairs and excavation.

 

 

Skilled Plumbers Can Detect Leaks Quickly

 

In case, the water leak is visible, call a professional plumber immediately. Here’s what the emergency plumber St George would do:

 

• He would locate the water meter of your property and the main water shut-off valve.

 

• The professional will take a meter reading and close all faucets and water-using appliances for some time.

 

• After 30 minutes to an hour, he will go back to the meter and take a reading. If the reading is higher, it indicates the presence of a leak in the ground or internal plumbing system.

 

• Then, he will turn off the main meter valve is turned off, and take another reading. If the meter stops moving, it means the leak is inside the house. In case, the meter keeps running, the leak is under the ground and needs immediate repair.

 

Leak Detection Tools

 

When our professional plumber determines the nature of the leak, the next step is to locate the location of the leak. Our emergency plumber St George will use a variety of tools for water leak detection, including:

 

• Video cameras
• Ground microphones
• Sonic leak detection devices

 

Once they have identified where the problem likes, they will fix the leak using the latest techniques and equipment. With over 20 years of experience behind us, we at Shire Care Plumbing have the expertise to handle all your gutter replacement and repair and other plumbing requirements. For more information, feel free to call us at this number- 1800 744 732. You can also request a free quote via this online form.

Consistent water flows from faucets, and showers are dependent on steady water pressure in a water system. When the water pressure falls due to excessive use of water in the house or a sudden pipe burst, you face water pressure issues in your home. We at Shire Care Plumbing have observed these issues arising at various properties sometime or the other.

 

The drop in water pressure creates some problems. It reduces the water flow in your system, and also allows contaminated water to get drawn into the water system from various sources such as ground, storage, etc. The presence of backflow pressure is another reason why contaminants get pulled into the potable water system. Among the sources of the back water pressure are:

 

• Pumps installed in the water distribution system.
• Power washing equipment.
• Heat exchanging equipment.

 

The above sources disturb the static pressure in a pipeline. Under these circumstances, you should not ignore the risk of chemicals causing contamination of the potable water on your property.

 

The Best Solution for Backflow Prevention

 

Installing, a backflow prevention device, is the best way to prevent the risk of water contamination. Current building and plumbing regulations require the installation of these devices in all new buildings when the structure is being built. Sydney Water conducts an audit of all industrial and commercial properties in the city to ensure compliance.

 

The directives related to the installation of the backflow devices consider issues such as the risk factor of the property and the nature of business run on a site. Local councils or local authorities control the compliance matters for properties located outside Sydney. Regardless of the type of property (residential, commercial, or industrial), the following three aspects are essential in deciding the type of device and the location of the feature:

 

• Containment
• Zone
• Individual

 

When you fit the device at the main meter assembly, your entire property is protected. The best way to ensure correct installation is to call an experienced local plumber for the job.

 

Backflow Prevention -Compliance Requirements

 

A property owner must follow compliance requirements in a sequential order, such as:

 

1. Testing and certification by a licensed and experienced local plumber (with additional training) of the backflow prevention assembly to be installed.
2. Testing and certification of valves after the initial installation is complete.

 

A property owner must get the devices tested and certified on an annual basis, or if they undertake repairs or relocation. We help you to complete compliance formalities as per Sydney Water rules and regulations. This helps to ensure the safety of the potable water on your property.

 

With over 20 years of experience behind us, we at Shire Care Plumbing have the expertise to handle all your backflow prevention and other plumbing requirements. For more information about our local plumber St George services, feel free to call us at this number- 1800 744 732. You can also request a free quote via this online form.

A water pipe burst is no less than an emergency, and you need to attend to it on a war footing leaving aside all your scheduled work for the day. Whether it takes place on a residential or commercial property is immaterial; fixing the problem is a priority.

In this situation, you need to contact a company that provides 24/7 emergency plumbing services and fixes the problem immediately. At Shire Care Plumbing, we provide our customers with excellent services at any time of the day and night. 

Symptoms of a pipe burst

Everyone agrees that a burst pipe is a serious issue, but they often do not know that it has happened. They may notice the signs of a burst pipe, such as:

• Bathroom and kitchen taps going dry suddenly.
• Reduced water pressure.
• Water seepage through walls.
• Damp patches of the walls
• Water accumulating in areas near the walls of the bathroom and kitchen.

If you notice any of these signs near your bathroom and kitchen areas, it is best to call a knowledgeable and experienced local plumber in Sydney to fix the problem. It could be possible that the signs are due to just a crack in the pipe, but it can lead to a pipe burst if left unattended.

And even otherwise, the damage to various features will continue. An apparently minor plumbing issue has the potential to become a major plumbing problem, and you may end up spending a tidy sum in addition to the trouble you undergo to fix it.

Timely And Effective Plumbing Services

What you need in this situation are timely and effective burst and leaking pipe services. Call us as soon as you notice a pipe burst or even a leak. We promptly respond to your call, and our experienced plumber will reach your office or home immediately. We will remove the cause of your distress quickly and efficiently. We keep our service vehicles stocked with the necessary equipment, tools, and spares to handle any plumbing issue.

Repair Services For Different Types Of Burst Pipes

We believe in ensuring customer satisfaction, and that is why we work with all types of plumbing work. We train our plumbers to keep up with new technologies, new materials, and new tools to provide top-notch and timely services to our clients. They are capable of handling all types of metal and PVC pipes used for plumbing structures in homes and commercial buildings in Australia. The different types of burst pipes we can fix are:

• Galvanised pipes
• Plastic pipes
• Hepworth pipes
• Copper pipes
• Polyethylene pipes
• Pro-fit pipes
• Sharkbite pipes
• Rehau pipes
• Auspex pipes
• Brass fittings

No matter what kind of plumbing issue you are dealing with, we can handle all types of plumbing jobs for residential, commercial, real estate, and strata customers. With over 20 years of experience behind us, we at Shire Care Plumbing have the expertise to handle all your plumbing requirements. For more information, feel free to call us at this number- 1800 744 732. You can also request a free quote via this online form.

Durable and high-quality bathroom plumbing installations and fixtures can withstand consistent use every single day and work without any glitches. However, no installation can be permanent and has a lifespan. It can also diminish in efficiency after some time.

It isn’t easy to determine the condition of concealed fittings, but they too are likely to suffer from misuse or overuse. Some installations of low-quality material may stop working totally or work on and off. Regardless of the situation, it becomes necessary to upgrade certain plumbing installations after a certain period.

Plumbing Upgrades

If you are considering renovating your bathroom, it is the most appropriate time to upgrade the plumbing installations and fixtures too. We recommend that you hire an experienced plumber to check for any signs of deterioration in your current plumbing work and make sure that you get these problems fixed during the renovation work.

At Shire Care Plumbing, we offer excellent plumbing solutions to our customers and have vast experience in this industry. We have handled a variety of bathroom remodeling projects of different scales. Our team has in-depth knowledge about plumbing solutions and works closely with contractors, builders, architects, and designers as well as individual property owners.

How You Benefit From Bathroom Upgrades

Most homeowners consider bathrooms as an integral part of their home and want it to be designed as aesthetically as other spaces in the house. That is why bathroom renovations are common. It’s a good idea to get bathroom plumbing done at this time for various reasons:

• Prevent Any Plumbing-Related Damage- Periodic checks are necessary for old plumbing in your bathroom. Your bathroom shower may stop functioning, or a leak may develop in the concealed pipes. These issues aren’t always predictable. If ignored, you may face a problem of constant repairs. You can prevent damage to the features in your bathroom if you get plumbing upgrades done as a preventive measure.

• Increase Energy-Efficiency – Installing modern plumbing fixtures helps address the water and energy efficiency problems in your bathroom. Our expert plumbers provide complete information about these new fixtures. You can make a well-informed decision about the choice of these fixtures.

• To Enhance Property Value – Renovating the bathroom and upgrading the plumbing installations can boost the resale value of your property by about 10 to 20%.

• To Reduce Cost- If you get plumbing upgrades done while the bathroom renovation is in progress, you can save a significant amount of money on masonry and other civil work costs. If you go about this methodically, it will help reduce the overall cost of your bathroom renovation project.

With over 20 years of experience behind us, we at Shire Care Plumbing have the expertise to handle all your gutter replacement and repair and other plumbing requirements. For more information, feel free to call us at this number- 1800 744 732. You can also request a free quote via this online form. Our experts will call you shortly to discuss your requirements.